Kick Drum: turn master output level and drive level all the way down to get initial levels
TouchPatch: Pre-Dyn-EQ-DriveBus
Preamp:
Gain around 12:00, so orange LEDS just start lighting at loudest notes
Pad 0, polarity +, 48V on for condenser off for dynamic or ribbon mics,
HPF off, output SS
If you hear distortion even though the meter is not lighting red, turn on the pad switch
Dynamics:
Classic mode
Gain +4
Threshold 5, so 2-4 lights on meter light
attack 8 and release 2
EQ try +3dB @ 60 Hz, peaking
-2dB @ 560 Hz
+3dB @ 7.2 KHz peaking
DriveBus:
tube mode, output 6, turn drive up to get recording level
(Variations: try SS mode on DriveBus, drive at different levels by adjusting Drive and Output to get the perfect sound; try higher threshold and faster attack on Dynamics to compress the
peaks more.)