Pro Audio Gear for the masses
 
HomeCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 How do I track 6 tracks at the same time with the ECS-410 Everest?

View previous topic View next topic Go down 
AuthorMessage
Admin
Admin


Posts : 79
Join date : 2009-02-24

PostSubject: How do I track 6 tracks at the same time with the ECS-410 Everest?   Fri Feb 27, 2009 1:36 pm

Track 6 tracks from one mic at the same time- safety tracks and tracks at different stages of processing so processing choices can be changed later.
TouchPatch Pre-Comp-EQ-DriveBus
Plug a microphone into the preamp and set up accordingly. Set up EQ, compression, and the DriveBus for the sound you want from the master output.
Use the +4 and -10dB outputs from the preamp section into the recording device; this give you a totally unprocessed pre signal, plus the -10dB is a 'safety track' in case of any mic overloads.
Run the XLR output from the Dynamics section to the recorder, giving you the preamped, compressed signal with no EQ or DriveBus sound
Run the XLR output from the EQ section to the recorder, giving you the preamp, compressed, EQed signal with no DriveBus sound.
Run the +4dB and -10dB output from the DriveBus to the recorder for the 'master' output, as well as the lower level 'safety track'. bounce
Back to top Go down
View user profile http://summit.forumotion.net
 
How do I track 6 tracks at the same time with the ECS-410 Everest?
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Ambrose Akinmusire - My favorite Jazz track these days...
» Wicked Maiden samples of ALL tracks
» Disciple B-Sides
» Supergroup Black Country Featuring Glenn Hughes & Jason Bonham Reveal Album Track Listing
» New HB ~ Pääkallonpaikka

Permissions in this forum:You cannot reply to topics in this forum
Summit Audio :: Summit Gear :: Frequently Asked Questions-
Jump to: